The beauty of a shiny car is not only an eye-pleasing sight. It’s a magnet for would-be thieves. For this reason, many owners turn to automotive coatings to protect their vehicles from the elements. Ceramic coating is one of the most popular and working way to protect your car paint that also gives shiny feel. It is a very popular choice among car owners because it has many benefits.
It’s scratch-proof, water-resistant, weather-resistant, chip-resistant, and extremely durable. Ceramic coating is also the best choice for owners looking to add some extra flare to their ride, as it can be applied in different colors, shapes, and patterns.
We all know that a car without a protective layer of ceramic coatings is vulnerable to stone chips, rust, corrosion, and a host of other damaging elements that may leave your car looking rough and dirty.
If you’ve spent any amount of time cleaning your car or looking at your driveway, you’ve probably seen that a layer of ceramic coating can protect your car from damage and provide you with a much-needed shine. But there’s more to it than that. Ceramic coatings are one of the most effective ways to give your car a modern, clean look.
So here’s a simple breakdown of the best methods for applying ceramic coatings that can be easily applied by your hand. No need to go to a professional anymore.
What Is Ceramic Coating
Ceramic coating is the application of a thin, transparent film of ceramic glaze onto pottery to protect it from scratching and chipping. You’ve likely seen the shiny, metallic coating on some high-end pieces of cars. They’re made to look old but actually quite new—that’s what ceramic coating is. There are many different types of ceramic coating available, including clear and opaque coatings. They also comes in a variety of colors that people can use as their need. It’s most commonly used on car exterior surfaces to protect paint for a long lasting performance.
Why Ceramic Coating Is Blessings
Ceramic coating is a common practice for car owners, but most people don’t know the importance and blessings it plays in keeping cars safe. It is most commonly used item to protect vehicles from road debris, rust, corrosion and more. It also helps prevent accidents and keeps drivers and passengers safe while they’re on the road. The paint itself is actually a type of ceramic that’s applied using a process called electrostatic spray painting, and it can withstand temperatures up to 1200 degrees Fahrenheit.
Car finishes can degrade over time due to heat, humidity, dirt, oil, and UV radiation. Ceramic coatings are specially designed to withstand such conditions better than ordinary paints. So, if your car is going to be parked outside, where is it most vulnerable to damage? Ceramic coating can be one of the finest option to solve the issue in a matter of time.
Steps to Apply Ceramic Coating to a Car
To properly ceramic coating your car, you need to know the proper way that can give your car a shiny look. Unless you will end up in a mess. So let me share with you my success steps that I followed to apply ceramic coating on my car.
Wash your car properly
Washing your car properly is important to get the best result possible before starting the ceramic coating process. A clean car always looks better and is easier to maintain, but there are many ways to wash it. The most common way to wash a car is to use a hose or a garden sprayer, and the key thing to remember when washing a car is to use soap and water, and rinse well afterwards. But if you want to get the dirtiest car cleaner, there is a spray called a car shampoo which is used to wash cars.
Sand the surface
Before you can apply the ceramic coating on a car, you will need to sand the surface. You should use the sandpaper to remove the rust from the car. Then, clean the surface to make it smooth. For this step, you can use the pressure washing system.
Dry the car exterior
After washing, the next step in the process is to dry the car. Drying is a fairly easy task, but if you don’t take the proper steps to do it correctly, you could damage your vehicle. To get the job done right, follow these steps:
1) Fill the car with fresh air using a fan
2) Use a high-quality hair dryer, since you’ll need a lot of direct heat
3) Turn the heater on low for 5 minutes and turn it off
4) Wait for 20 to 30 minutes for the temperature to cool down
5) Once the temperature has lowered, run the heater for 15 to 20 minutes
6) Let the car rest for another 15 to 20 minutes then move on to applying the ceramic coating
Prepare the coating
Now, you should prepare the Ceramic coating. In order to prepare the Ceramic coating, you will need to mix the formula with water and baking soda. Next, mix the mixture until it forms a thick paste. The next step is to add the ammonia to the mixture. You should add one-eighth of a cup of ammonia to the mixture. You need to mix the mixture again until it forms a thick paste. You need to wait about 20 minutes before using the Ceramic coating.
Apply ceramic coating properly
Once you have mixed the formula, pour it into a spray gun. If you don’t have one, you can just pour it directly into a bowl. Make sure that the formula is evenly mixed. Once you have done that, you should apply the coating onto the car.
Avoid these things: Make sure that you don’t touch your skin with the coating. It is very dangerous to use the coating on your skin. If you get the coating on your skin, wash it off immediately with soap and water. Do this before the coating dries up.
Conclusion
After reading the article, you will have learned a lot about car painting and ceramic coating. You should keep this information in mind and you’ll be able to apply ceramic coating on your car easily. You can either use ceramic coating yourself or you can have a professional do it for you. If you do it yourself, you will need to have the proper tools and equipment. These can be found at a hardware store or an auto parts store.
You should know how to operate the equipment before you do it. For instance, you’ll need to have a paint brush, a paint tray, a mop, a spray gun, etc. To make it easier, you can order some products online. You’ll also need a respirator and safety glasses. You should avoid using abrasive materials while you are doing the job.