Car wax is made from kind of wax, petroleum, and mineral oils. Car wax is very easy to use and apply. Sometimes it can be hard to remove from the wax applicator pad. You should wash the car wax applicator pad immediately after using it. If you leave it sitting around, the excess wax may harden and become sticky. This makes it difficult to remove.
If you try to remove the car wax from the car wax applicator pad using the soap in your shower, you will end up cleaning the soap in your shower instead. This will mean that you have to get new soap. This is not only bad for the environment, but it can also be expensive.
Another option would be to put the car wax applicator pad in the refrigerator. But, you should check the temperature of the refrigerator to make sure that the temperature is not too cold. If the car wax applicator pad is left in the refrigerator for too long, it can get moldy. After that, you can just throw it away.
So, you can use the following simple and easy instructions to clean the car wax applicator pad perfectly.
No products found.
Remove the applicator pad
Take off the car wax applicator pad and throw it away. You should dispose of it properly to avoid making a mess.
Wipe off dirt
Now it’s time to clean the car wax applicator pad. You should clean it right away. First, you should wipe off the dirt on the car wax pad using a paper towel. Make sure that you don’t use too much force. This will make your car wax apply unevenly.
Remove excess wax
After that, you should remove the excess wax with paper towels. Keep in mind that the paper towel use are going to use, it required to be clear and dry to better wax removal.
Place in a zip-top bag
Place the car wax applicator pad in a zip-top bag. These bags are one of the flexible, fire-proof, micro oven proof, and waterproof; those can be used doing various tasks. If you are knowing about the bag for the first time, click here to know more or having one of them straight away.
Put in freezer
Put the car wax applicator pad in the freezer for about an hour.
Thaw
It’s recommended that you let the car wax applicator pad thaw completely before you remove the car wax applicator pad from the freezer. Make sure that the car wax applicator pad is completely dry.
Squeeze out water
Squeeze out the excess water from the car wax applicator pad. Simply you can use specials towels those are applicable to squeezing out water from car wax applicator pad. You can also use any normal soft towels to do the task as per requirement.
Rinse pad
Rinse the car wax applicator pad with cool water. When you clean your wax applicator pad, make sure that you use a high quality cleaner. Never use regular soap or detergent. The reason is that soaps tend to leave residues that attract dirt and debris. Detergents are too abrasive. Instead, you need a cleaner that removes wax, grease, dirt, and grime without leaving a residue. For this type of cleaning, you’ll need a degreaser with a non-abrasive formula that is safe to use on delicate surfaces such as your paintwork.
Roll dry
Finally, use only a clean, dry cloth to roll the car wax applicator pad dry. It is important that you dry the car wax applicator pad as soon as possible so that it doesn’t get moldy.
Conclusion
In conclusion, when you are done cleaning it, wipe the applicator pad with a rag or paper towel to remove any debris, and then store it away in a container or plastic bag. Don’t throw it away. It can be useful in the future. To clean it in the future, follow the same instructions.